Layout Table~~~~5102~5102~~

Lensbaby 2~Lensbaby 2.0 improves upon the original Lensbaby in three key areas:
Sharper: Lensbaby 2.0 uses a coated, high refractive index, low dispersion optical glass doublet that creates a sweeter spot of focus. The original Lensbaby features a single uncoated optical glass element.
Brighter: Lensbaby 2.0 now features an f2.0 aperture setting in addition the the original Lensbaby's f2.8, f4.0, f5.6 and f8.0
Faster: With Lensbaby 2.0 shielded magnets levitate your aperture disk just above the optic. Changing apertures is quicker than with the original Lensbaby, which holds its aperture disk in place with a rubber gasket.~~Lensbaby 2 NIKON FIT|!4612|Lensbaby 2 CANON FIT|!4613|Lensbaby 2 PENTAX FIT|!4614|Lensbaby 2 4/3 fit|!4615|Lensbaby 2 MINOLTA FIT|!4616|~5102~5103~~

Lensbaby Macro kit~Lensbaby Macro Kit
The Lensbaby Macro Kit will allow you to focus your Lensbaby from 2" to 13" and capture eye-popping details, Lensbaby style. The Lensbaby Macro Kit contains one +4 and one +10 macro lens and will fit either the Original Lensbaby or Lensbaby 2.0.
SPECS +4 lens allows you to focus your Lensbaby from 6" to 13" away +10 lens allows you to focus your Lensbaby from 3.5" to 5" away Stack the +4 lens on top of the +10 lens to focus from 2" to 3" away~~Lensbaby Macro kit|!4611|~5102~5104~~

Flaghead Ringflash Adapter SIRC- Canon~The Ringflash Adapter is unique! It was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of internal prisms, reflectors and light-shapers to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered, i.e. have a cable from ringflash to power pack.~~Flaghead Ringflash Adapter SIRC- Canon|13242|~5102~17411~~

Flaghead Ringflash Adapter RAN160- Nikon~The Ringflash Adapter is unique! It was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of internal prisms, reflectors and light-shapers to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered, i.e. have a cable from ringflash to power pack.~~Flaghead Ringflash Adapter RAN160- Nikon|13243|~5102~17413~~

Kenko 1.4X AF DG Pro 300 Converter~Kenko Teleplus DG 1.4X Pro 300
Multicoated for high resolution
5 elements in 2 groups
Length 19.4mm
Weight 132g
Full AF operation with the Teleplus 1.4X Pro 300 is possible with camera lenseswith open apertures of F4 or faster
Digital Compatible
Exposure factor 1 stop

Available in Canon/Nikon/Minolta fittings
~~Kenko 1.4X AF DG Pro 300 Converter Nikon|!4623|Kenko 1.4X AF DG Pro 300 Converter Canon|!4624|~5102~5107~~

Kenko MC7 DG 2X Converter~Kenko Teleplus DG 2X MC7 Teleconverter
Multicoated for high resolution
7 elements in 5 groups
Length 35.7mm
Weight 170g
Full AF operation with Teleplus 2X MC7 is possible with camera lenseswith open aperture of F4 or faster
Digital compatible
Exposure factor 2 stops

Available in Canon/Nikon/Minolta/Pentax fittings~~Kenko MC7 DG 2X Convertor Nikon|!4625|Kenko MC7 DG 2X Convertor Canon|!4626|~5102~5108~~

Kenko 2.0x AF DG Pro 300 converter~Kenko Teleplus DG 2X Pro 300
Multicoated for high resolution
7 elements in 4 groups
Length 43.5mm
Weight 184g
Full AF operation with Teleplus 2X Pro 300 is possible when using camera lenses with maximum aperture of F4.5 or faster
Digital Compatible
Exposure factor 2 stops

Available in Canon/Nikon/Minolta fitting~~Kenko 2.0x AF DG Pro 300 convertor Nikon|!4627|Kenko 2.0x AF DG Pro 300 convertor Canon|!4628|~5102~5109~~

Kenko 3.0x AF Pro DG 300 Converter~Kenko Teleplus DG 3X Pro 300
Multicoated for high resolution
7 elements in 4 groups
Length 65mm
Weight 194g
Full AF operation with Teleplus 3X Pro 300 is possible when using camera lenses with maximum aperture of F2.8 or faster
Digital Compatible
Exposure factor 3 stops

Available in Canon/Nikon/Minolta/Pentax fittings~~Kenko 3.0x AF Pro DG 300 Convertor Nikon|!4629|Kenko 3.0x AF Pro DG 300 Convertor Canon|!4630|~5102~5110~~

Kenko Auto Digi-Meter KFM-1100~KENKO KFM 1100Professional Light MeterKENKO KFM-1100 light meter, an easy-to-use, accurate, full-featured hand-held light meter for reading both ambient and flash light.For most people the minimal, clearly marked buttons will make using the meter second nature in very little time. The side of the meter only has 3 buttons, the largest is for taking measurements, the other two set on a rocker are UP/DOWN input buttons for changing F no., shutter speed or ASA/ISO. This simple, easy-to-use ergonomic design feels comfortable in your hand and its logical control layout will please photographers who want to concentrate on the subject, not their equipment.Large, easy to read LCD_displays measurements in F no. format with large numbers in 1/10 stop increments and in more common 1/2 stop increments in a pointer scale across the top of the LCD display. LCD also has a back-light for easy reading in low light situations.The meter is sensitive enough for ambient (existing) light to be measured for a shutter speed range from 30 minutes to 1/8000 of a second. In Cine mode it can be used to read frame-rates of 8 to 128 frames/sec.For measuring flash, the meter has modes to either trigger the flash using a sync-cord or set to non-sync cord for manual flash triggering. The aperture range that can be displayed is from f/1.0 to f/128.Useful in mixed flash/ambient lighting situations, the “Analyze” function can determine the ratio of ambient to flash light in a scene. This feature is very handy in scenes where a flash is being used to “open up” a shadowed area left by ambient (natural) light.The meter function can be used to average measurements that have been stored in memory, very useful in reflected light measurements to capture highlight or shadow detail more accurately. The KFM-1100 has two memory slots to store previous measurements that can be recalled for reference or for averaging. Just press the “M” button after each reading to store it in memory. If the memory has two readings stored, it will delete the oldest reading to store the current information.~~Kenko Auto Digi-Meter KFM-1100|11153|~5102~15669~~

Kenko Flash Meter KFM-2100~KENKO KFM 2100The KFM2100 has advanced features, offering average and spot measurement using the built in viewfinder. A latitude display and its shadow or highlight preservation functions will help photographers maintain detail in these areas of their subject and can be combined with a 10 point memory function for maximum accuracy. An average or spot reading can also be compared with a highlight or shadow area showing the stop value difference which can be particularly useful for calculating which ND Grad is best suited to preserving sky detail in a scene.The KFM-2100 will read ambient and flash light. For flash, the meter has settings for both cord and non-cord triggering.An integrated spot meter makes spot readings in both ambient and flash modes fast and easy with no need to stop and add accessories.Large, easy-to-read vertical LCD_that displays F No. values both numerically in 1/10 stop increments with large numbers and in a more common 1/3 stop increments on a vertical scale running up the long side of the LCD . Excellent clear-view viewfinder with F No. read-out in the viewfinder to read reflected light without having to look away from the scene. Dioptric adjustments are built-into the viewfinder.Advanced in-meter exposure evaluation tools.The KFM-2100 has an Exposure navigation system, allowing the photographer to easily confirm the exposure for each part of the subject or scene displayed on the LCD_to assist in determining the best exposure.Useful in mixed flash/ambient lighting situations, the Analyze function can determine the ratio of ambient to flash light in a scene. This feature is very handy in scenes where a flash is being used to open up a shadowed area left by ambient (natural) light.The meter Calculation function can be used to average measurements that have been stored in memory, very useful in reflected light measurements to capture highlight or shadow detail more accurately. The KFM -2100 has the ability to store up to 9 measurements that can be recalled for reference or for averaging. Just press the M button after each reading to store it in memory. If the memory reaches its maximum, it will delete the oldest reading to store the current information.Latitude Display Function for film or digital, useful for scenes with a large brightness difference between light and dark areas.~~Kenko Flash Meter KFM-2100|11154|~5102~15671~~

Kenko Colour Meter KCM-3100~KENKO KCM 3100Knowing the color temperature of a light source is extremely important for consistently faithful color accuracy and reproduction in photography. Reproducing accurate color is critical in many areas of photography such as fashion and commercial product. Useful for both still and cine photography.The KCM-3100‘s uncluttered control button layout and large easy-to-read LCD make using the meter much easier than other options on the market today.The KCM-3100 has 3 display modes for diplaying color temperature. Each mode is designed for a certain type of photography or filtering system.LB_(Light Balancing) LB_index is used to select the necessary amber or blue LB_filter. The Mired difference between the specific photographic color temperature for the selected film type and the light source.CC (Color-Correction) displays the Kodak“ filter number(s) of the necessary light-balancing filter(s) to make for easy selection of the required light balancing filter. Where as the LB system uses Amber or blue filters, the CC system uses Magenta or Green color compensating filters.Photographic color temperature in degrees Kelvin. This is a useful setting to determine filtration based on the light source and the spectral sensitivity of the film used.The ability to take ambient and flash light readings using either a sync cord or non-cord. Using a sync cord, the flash is fired when the reading button is pushed. In the non sync cord mode, pushing the reading button puts the meter in a stand-by mode and when the flash is fired the meter displays those readings.“Analyzer Mode” for measurement of Flash lighting only. Setting the shutter speed to “F”, the meter will only read light from flash.9 memory channels for customizing the meter to your equipment and materials- All film and equipment manufacturers claim that their products are calibrated or balanced to “daylight” (5500K) or tungsten (3400K or 3200K), but in the real world these number are often not 100% accurate. Film can vary from batch to batch and light bulbs and flash tubes can have slight shifts in color over time. Once these differences are determined, The KCM-3100’s 9 memory channels allow the photographer to enter custom setting based on the situations or individual film characteristics they are working with. Once the data is entered and stored, the meter will adjust future readings accordingly.~~Kenko Colour Meter KCM-3100|11155|~5102~15673~~

Seculine Twin-1 R3 Infa Red Remote Camera Release UT/UTN Version~

Twin-1 UT/UTN Version.

*Up to 150ft range
*Supplied with camera connecting cable for bulb release
*Use as Wired or Wireless Release
*Two position Button for Focus Shutter Release with compatible cameras
*Blister Packaged

Specifications:
*Wire Cable Length - 1 Meter
*Battery - 23A type battery (12V)
*Wireless maximum range - Nikon, Pentax cameras 50 meters.
Canon cameras 25meters.
*Weight & Size - 19g 26 x 88 x 17mm

~~Seculine Twin-1 R3 UT - Universal|11322|Seculine Twin-1 R3 UTN - Nikon D70s/D80/D200/D2XS|11323|~5102~15796~~

Seculine Twin-1 R3 Infa Red Remote Camera Release TRC/TRN/TRS Version~

Twin-1 RC3 TRC/TRN/TRS Version

*Sender and Receiver Kit
*Up to 300ft range
*Receiver plugs directly into your cameras remot port
*Swivelling Body and head on receiver for ultimate coverage
*Fire from in front or behind camera
*Cable supplied for wired bulb release

Specifications:
*Wire cable length - About 1 meter
*Battery - Transmitter 23A type Battery (12V) / Receiver CR2032 Type (3V)
*Wireless maximum range - With receiver 100 meters / For Nikon & Pentax cameras with Transmitter only 50 meters.
For Canon cameras with transmitter only 25 meters.
*Weight & Size - Receiver 19g. 26 x 88 17mm
Transmitter 14g. 28 x 60 x 30mm

~~Seculine Twin-1 R3 TRC Kit - Canon 3 pin|11324|Seculine Twin-1 R3 TRN Kit - Nikon 10 pin|11325|~5102~15798~~

Zigview Digital Angle Finder~Compatable with Slrs and Digital SLRs, 1.3 megapixel CMOS sensor, ithium Polymer Battery, User Friendly Setting Tools, High Quality Image Display. ZIGVIEW simply attaches to the eyepiece of your SLR camera where the viewfinder image is captured by a CMOS sensor built into the Zigview and relayed in real time to a 1.9 inch/TFT colour display for easy viewing at any angle.
The Zigview is particularly useful for low angle photography where you would struggle to see through the viewfinder especially with Macro work, or high angle situations such as press work where it is impossible to see the subject when taking pictures over crowds etc. Zigview makes it easy to see the subject in both these situations and many more, without any difficulty.
ZIGVIEW will work with most digital and film SLR cameras and is supplied with an eyepiece adapter for common Nikon, Fuji and Canon cameras. Other adapters for Konica Minolta and Pentax are available as accessories.

*Includes Canon C1 & Nikon N1 adapters.~~Zigview Digital Angle Finder|!4641|~5102~5118~~

Zigview R Digital Angle Finder~Digital Angle Finder with extra features over the standard Zigview. These include: Remote shutter release, interval shutter release, B and T shutter mode, Motion detector shutter release, Rotating eyepiece adapter. Click the image for detailed specifications.~The Zigview–R incorporates all of the features of the original Zigview with its unique rotating angled TFT colour display, showing the viewfinder image on the screen for low and high angle photography and other situations where you would not normally be able to see through the viewfinder or simply where it is more convenient providing a “Waist Level Finder” style of approach.
Building on the success of the original model, Seculine have now released this flagship model which has an electronic shutter release capability. The new features built into the Zigview-R can be used in a variety of situations to control the shutter; when motion is detected with its 9 area motion sensor, using the sophisticated interval timing facility, using the Bulb exposure timer or simply as a remote cable release.
Seculine ZIGVIEW-R - the world's first TLL Motion Sensor shutter release, Interval & Exposure Timer, based on the original Zigview Digital Angle Finder.
The Zigview–R incorporates all of the features of the original Zigview with its unique rotating angled TFT colour display, showing the viewfinder image on the screen for low and high angle photography and other situations where you would not normally be able to see through the viewfinder or simply where it is more convenient providing a “Waist Level Finder” style of approach.
Building on the success of the original model, Seculine have now released this flagship model which has an electronic shutter release capability. The new features built into the Zigview-R can be used in a variety of situations to control the shutter; when motion is detected with its 9 area motion sensor, using the sophisticated interval timing facility, using the Bulb exposure timer or simply as a remote cable release.
Motion Sensing - This groundbreaking new facility performs a shutter release when small variations in the brightness level in 9 areas of the LCD screen indicate that there is movement in the image. Variable sensitivity - Each of these 9 areas can have independent sensitivities set by the user or some areas can have their sensing turned off to allow movement in these parts, or you can select to use the whole image as one sensor area instead of the 9 separate areas. Distance & Angle of measurement - The 9 area motion sensing capability is not restricted by distance or angle of view since it is sensing movement from the image projected through the lens of your camera. Therefore you can use the most extreme wide angle or telephoto lenses. Whether you are trying to capture an image of a train 5 miles away, a Bee 6 inches from your camera on a flower, or Deer crossing a park the Zigview-R will still look for movement over the whole viewable area. Camera Wake Up Time & AF Time - Since all SLR cameras are different the Zigview-R can be programmed to allow a user set period of time for the camera to “Wake up” if it has gone into sleep mode, and to focus if in AF mode BEFORE the shutter is triggered. This delays the shutter release time for a small period to allow your camera to wake and focus, rather than firing a signal to the shutter at the instant the motion is detected which could then be missed as the camera cannot start quickly enough. Timer Features - Start - Immediate - The motion Detection can be started instantly. Countdown -You can choose to start after a pre defined period of up to 24 Hours in 1s increments. Alarm - A start time and date can be programmed to any year, month & day & time. Timer Features – Stop - Endless – Zigview will continue motion detection until the user stops the process. Exposure Number – The unit will stop after a set number of exposures (max 999,999) Countdown – The unit will stop after a set time period in 1s increments up to 100 days. Date & Time – Sensing will stop after a specific time and date up to 999 ahead. Motion Detection Interval - The interval between motion detections can be varied to longer periods in order to detect the motion of slow moving subjects, or shorter periods to detect fast moving subjects. Delay time - You can set a delay time after motion is detected to allow for the mirror action of your camera, or to prevent the same subject continuously triggering the shutter. Exposures per Motion Detection - You can set the Zigview-R to capture several exposures per motion trigger at minimum intervals of 0.5s apart. Interval Timing - Interval timing can be performed with simple settings using number of shots required and the interval between shots, or more detaiuled settings can be specified as follows. Timer Features - Start Immediate - The Interval Timer can be started instantly. Countdown -You can choose to start after a pre defined period of up to 24 Hours in 1s increments. Alarm - A start time and date can be programmed to any year, month & day & time. Interval Parameters - Exposure Number & Interval – The unit will stop after a set number of exposures have been performed at the specified interval. No. Exposures & End Time – The unit will evenly space the required number of shots programmed until the specified end time and date. No. Shots & Duration – The unit will evenly space the required number of shots over the countdown duration specified. Interval & End Time – The unit will continuously fire the shutter at the specified interval until the end time & date is reached. Camera Wake Up Time & AF Time - Since all SLR cameras are different the Zigview-R can be programmed to allow a user set period of time for the camera to “Wake up” if it has gone into sleep mode, and to focus if in AF mode BEFORE the shutter is triggered. This allows the Zigview-R to account for the wake up and focus periods before the specified interval time is reached, ensuring the shutter is activated properly. Exposures per Interval - You can set the Zigview-R to capture several exposures per Interval time at minimum intervals of 0.5s apart. For instance you could set the timer to take 5 images 1 second apart after an interval of 8 minutes. Bulb Interval Exposure - With your camera set on “Bulb” you can set the Zigview-R to expose the subject for a specified bulb duration within the interval timing facility. ie. you could set the unit to make a 90 second exposure every interval of 1 hour and 10 minutes.~Zigview R Digital Angle Finder|!4640|~5102~5119~~

Zigview Eyepiece adapters~~~Zigview N1|!4642|Zigview N3|!4643|Zigview C1|!4644|Zigview C2|!4645|Zigview M|!4646|~5102~5120~~

Zigview Infra-Red cable release~Please state camera model when ordering.~~Zigview Infra-Red cable release|!4648|~5102~5122~~

Zigview S2 - NEW!!~

The Zigview S2 is a unique Live preview monitor which relays a real time image from the viewfinder to the 2.5 inch TFT LCD display with a high 25fps frame rate giving a video quality image.The camera section is slotted over the eyepiece of your SLR camera with a screen which can be rotated and swivelled into any position for convenient viewing, displaying a full screen image in the correct orientation.

Feartures:
*Live Preview Viewfinder - Convenient real time display of the viewfinder image on the Zigview S2’s 2.5 inch, tilting and rotating TFT LCD display.
*TV Output – Take a video feed directly from the Zigview S2 to display on an external monitor or TV, or directly to a Video or DVD recorder.
*Detachable Screen – The TFT LCD screen can be detached from the main unit and used in conjunction with accessory cables up to 10 metres from your camera with a shutter release function.
*Motion Sensor - Triggers the cameras shutter where motion is detected through the lens.
*Interval Timer – Can be set up to trigger the shutter using a variety of sophisticated settings.
*Cable Release – Acts as cable release when Zigview S2 is used in conjunction with the remote screen accessory cables.
*Bulb Exposure – Accurate Bulb Exposure facility. Can be used in conjunction with the interval timer

~~Zigview S2 Kit %22A%22 includes RV01 + RC21 + RC22|11319|Zigview S2 Kit %22B%22 includes RV01 + RC21 + RC22 + RC23 + RC24 + RC25|11320|Zigview S2 Kit %22C%22 includes RV01 + RC22|11321|~5102~15790~~